Lotus T-580 ARF Quadcopter (Photo/FPV Platform)

Click to enlarge Art.nr.: LTS-T580ARF Dealers Only  Notifications Notify me of stock updates to Lotus T-580 ARF Quadcopter (Photo/FPV Platform)

Main features of the T580 quadcopter: Almost ready to fly 1) Inertial-based (6DOF IMU) self-stabilization system.Good for AV/AP applications,but not suitable for acrobatics flights. 2) A 4 channel Tx is enough.No more switchs for the flight modes 3) ARTF, no extra settings needed.Put on the props,the battery and the RX,then turn on the Tx to take off ! 4) AP/AV based 5) Auto Barometer-based altitude hold if no throttle input changed in 2s.. 6) X and Corss flight modes available. 7) Optional single axis camera mount(pitch) with double axis self-stabilization (pitch and roll) . 8) Larger MTM distance (580mm) ,larger payload (<580g) ,and longer flight time (25 mins with 3S Battery) .Special props offered by the manufacture. 9) Powerful, can easlily lift loads to around 600 grams. 10) Buzzer warning for low battery,and optional lights for night flight (The interfaces are available,but soldering should be done before coming out of the factory according to the demands of the costomers.In order to avoid some trouble of making the hardware easy to be damaged) . 11) Other features considering to be supported in the future: Configuration Software available and Firmware upgradable. *This is the ARTF kit, you only need a receiver and transmitter to get it ready for flying. Specifications: Machine size 608 × 608 × 243 mm ±3mm Expand size of the largest 885 × 885 × 243 mm Motor Wheelbase t Diagonal line, the two motor centers wheelbase 580mm ±3mm Propeller 1260, positive and negative special paddle 12” Battery LiPo 3S 2200mAh 20C 1P Single Weight No battery, receiver, load 730g ±10g Take-off weigh 3S 2200mAh 1P Battery, receiver, head 950g standard Payload Camera card ≤230g standard Maximum power pulled Using the standard battery 1P 2400g - Maximum payload Using the standard battery 1P ≤580g - Maximum takeoff weight Using the standard battery 1P 1800g Safety limit Flight distance Remote control device and battery capacity by the decision - - Flight Time 3S 2200mAh 1P Battery, receiver 12 minutes No wind hover Wind strength ≤4 Class - Includes: 1x Pre-installed aircraft main body, including brushless ESC, flight control panel, motor. 1x Pre-installed stands unit, including 4 fixed nuts. 3x Pairs of special propellers in positive and negative. 4x Bullet blade holders. 1x Velcro * Pan & tilt for camera is not included.